Description
Compatible Models
D3K/D4C/D4D/D4G/D4K/D5K/D5H/D5M/D5N/D5H/D6D/D6M/D6N/D6H/D6M/D6N/D6K/D6R//D7G/D7F/D7H/D7R/D8R/D8K/D8N/D9N/D9G/D9R/304E/305/306E2/307D/308D/312D2/313D/314D/315D/318D2/320B/320C/320D/320D2/320NGH/322BL/323D/325C/325D/326D2/329D/330B/330C/330D/336D/336D2/345D/349D/365C/374FL/390DL/390FL/416B/416D/416E/ 416F/428C/428E/428F/CS533E/CS533D/CS563C/CS533D/CB14B/CW34/CB7/AP655F/AP355F/AP655D/120H/120G/140H/ 140K/140G/14M3/16G/16M3/773E/777D/773D/772G/740B/773B/935/938F/966C/966H/950F/950GC/980C/990H/992G
| Characteristics | HYDO Advanced 30 |
HYDO Advanced 30 Advantages | ||
| SAE Viscosity Grade | 30 | Better wear protection, wider operating temperature range | ||
| Viscosity cSt @ 40?C (ASTM D445) cSt @ 100?C (ASTM D445) Viscosity Index (ASTM D2270) |
90 10.6 100 |
|||
| Viscosity after Shear 2????? (cSt, during use) | 10.6 | |||
| 4 Ball (40kg/30min/600rpm/93?C ASTM D4172) | 0.30 mm | |||
| Pour Point, ?C (ASTM D97) | -24 | |||
| Brookfield Viscosity @ -20?C (ASTM D2983) mPaS | 13,600 | |||
| Zinc, % wt. (ASTM D4951) typical | 0.090 | |||
| Copper Strip Corrosion3 (3 hr, ASTM D130) | 1A @ 150?C | Corrosion protection | ||
| Rust Protection (ASTM D665B) | Pass | |||
| Oxidation stability, hours (ASTM D943) | >5,000 | Longer drain interval; lower owning and operating costs | ||
| Long Drain Interval, confirmed by field testing | Yes | |||
| Filterability, Wet, E DIN ISO 13357-1 | Pass | Reduced filter plugging; improves contamination control due to better filtration | ||
| Foam Test 4 Seq. 1 ml. (ASTM D892) Seq. 2 ml. (ASTM D892) Seq. 3 ml. (ASTM D892) |
0/0 0/0 0/0 |
Reduces foaming | ||
| Cleanliness | No interference with optical particle counters | Accurate contamination control | ||
| Ability to keep water in emulsion | Yes | Sludge control and water damage prevention | ||
1 The values shown are typical values and should not be used as quality control parameters to either accept or
reject product. Specifications are subject to change without notice.
2 Oils that contain viscosity modifier additives will become thinner during use in this machine. This will reduce
protection level.
3 1A is better than 1B, 1A at 150? C is better than 1A at 100? C.
4 New oil, as received, with 0.1% water by volume added.