Cat Prime Application Grease


Part Number : 4526007

Part Name : Cat Prime Application Grease

Click below to download the flyer

Available on backorder

SKU: 4526007 Category:


Compatible Models

D3K/D4C/D4D/D4G/D4K/D5K/D5H/D5M/D5N/D5H/D6D/D6M/D6N/D6H/D6M/D6N/D6K/D6R//D7G/D7F/D7H/D7R/D8R/D8K/D8N/D9N/D9G/D9R/304E/305/306E2/307D/308D/312D2/313D/314D/315D/318D2/320B/320C/320D/320D2/320NGH/322BL/323D/325C/325D/326D2/329D/330B/330C/330D/336D/336D2/345D/349D/365C/374FL/390DL/390FL/416B/416D/416E/ 416F/428C/428E/428F/CS533E/CS533D/CS563C/CS533D/CB14B/CW34/CB7/AP655F/AP355F/AP655D/120H/120G/140H/ 140K/140G/14M3/16G/16M3/740B/773E/777D/773D/772G/740B/773B/935/938F/966C/966H/950F/950GC/980C/990H/992G

Typical Properties
Color Gray Black
Molybdenum Disulfide, % 3
Operating Temperature Range, ?C -20 to +140
Operating Temperature Range, ?F -4 to +284
Base Oil Type Mineral
ASTM D445 Base Oil Viscosity 40?C, mm?/s 320
Thickener Type Lithium Complex
ASTM D2265 Dropping point, ?C 260
ASTM D217 Penetration, worked 60, mm/10 280
ASTM D1831 Roll stability, penetration change, mm/10 -3
ASTM D2266 4 Ball wear, scar diameter, mm 0.47
ASTM D2596 4 Ball weld load, kg 400
ASTM D1743 Rust prevention Pass
ASTM D4048 Copper corrosion 1A
ASTM D1264 Water wash-out, 79?C, mass % 6

The values shown are typical values and should not be used as quality control parameters to either accept or reject product.

Specifications are subject to change without notice.